All Labs Can Use the Microlab 600

by Oct 11, 2018Analytical

Microlab 600 Diluters & Dispensers

Every laboratory has tasks that are too small to automate and too large to reliably accomplish by hand. The Microlab 600 is a semi-automated liquid handler designed specifically for these in-between applications. The Microlab 600 increases throughput and consistency while reducing cost and wasted reagent.

Common industries utilizing the Microlab 600 are:

  • Forensics
  • Environmental Analysis
  • Mining
  • Manufacturing
  • Research Labs

Microlab 600 Diluters

Microlab 600 diluters are highly precise syringe pumps designed to quickly and easily dilute liquids. This positive displacement system provides better than 99% accuracy and the inert fluid path minimizes sample carry over and improves compatibility with harsh chemicals.

Microlab 600 Dispensers

The Microlab 600 can be configured with single, dual, or continuous dispensers. Each dispenser is based on a positive displacement system that provides better than 99% accuracy, independent of a liquid’s viscosity, vapor pressure and temperature.

Stand Alone Syringe Pumps

Microlab 600 stand-alone syringe pumps allow you to custom program methods and deploy commands to any instrument on your network from anywhere in the world. Available in two communication capabilities—Ethernet and RS-232.

The Microlab 600 is built to exceed expectations

The Controller
The Microlab 600 Controller integrates a streamlined user interface with a large touchscreen display. Dilutions, dispenses, titrations and more are visually displayed in real time with just the touch of a button.

The Syringe Pump
The Microlab 600 is available as a single or dual syringe system. The high torque, precision stepper motors provide unsurpassed positional accuracy across the full range of Hamilton syringes from 10 µL to 50 mL.

The Universal Valve
Innovative fluid logic enables the same Universal Valve to be used in all Microlab 600 dispensing and diluting applications.

The Bubble-Free Prime (BFP) syringe
The Bubble-Free Prime (BFP) syringe has a conical plunger tip that extends through the threaded termination and into the valve. This unique design expels the air from the syringe and valve decreasing the number of required priming cycles.

About Hamilton

Hamilton Company specializes in the development, manufacturing and customization of precision measurement devices, automated liquid handling workstations, and sample management systems. Hamilton’s processes are optimized for quality and flexibility. Whether it’s a custom needle with a quick delivery time frame, a special length pH sensor, or a comprehensive solution to fully automate your assay workflow, trust that Hamilton products will always meet your needs.

Hamilton Company has been a leading global manufacturer for more than 60 years, with headquarters in Reno, Nevada; Franklin, Massachusetts; Timișoara, Romania; and Bonaduz, Switzerland; and subsidiary offices throughout the world.

Available on GSA exclusively through Government Scientific Source

Want More?

Sign up for the quarterly GSS Resources Newsletter, an eNewsletter that delivers new technology and news, straight to your inbox.

Contact the GSS Team Today!
Government Scientific Source (GSS) is the leading dedicated distributor of laboratory products and equipment to federal, state, and local governments.
12351 Sunrise Valley Drive
Reston, VA 20191

Virginia Warehouse
13894 Redskin Drive
Building 6
Herndon, VA 20171
California Branch
258 Lindbergh Avenue
Livermore, CA 94551

New Mexico Branch
2701 Broadway, NE
Albuquerque, NM 87107

Tennessee Branch
10903 McBride LN
Knoxville, TN 37932
Copyright © 2020 Government Scientific Source. All Rights Reserved.